Thursday, 7 February 2008

Logitech Z4 2.1 Speaker System

If you've ever set up DVD players with projectors in a school classroom, you know that you need something better than the tinny little speakers in the projector itself for sound. It was quite apparent that small computer speakers, which often have an output of 2 - 3 watts, would also be unsuitable, lacking both power and fidelity. We started off using wooden Genius PC speakers, which cost about $60 a pair, and have an output of 10 watts. These produce enough volume but are not high on sound quality. We have begun to install projectors permanently mounted off the ceiling in our classrooms together with electronic whiteboards and it was an opportune time to look for better speakers.

After a bit of hunting around I ordered in a set of Logitech Z4 speakers for evaluation. I already have a set of X230 speakers attached to my work PC, which can be thought of as a step down from the Z4; they have similar functionality overall but less power and are cheaper, and the speaker cables are permanently attached to the satellites, which is not convenient for any application where the speakers need to be much further apart than the width of a computer screen. We had a look previously also at the Altec Lansing MX5021 system which is a more powerful edition at a higher price. The Logitech speakers have enough power however to fill an average classroom.

Inside the box is the sub, the satellites, a wired volume control, power cord and audio cable. Setting it all up is easy enough. The sub plugs into the mains and then all the other bits connect to the sub. The speakers each have an attached lead fitted with an RCA plug, so that they can have extension leads fitted if more distance is needed. An audio input socket is provided on the rear of the sub. The volume control, which also provides power switching, bass level adjustment and a second input socket as well as a headphone output, connects by a cable using a 9 pin D plug. The sound quality is about what I had expected; whilst not perfect it is very good for the price of the system, and the speakers handled being cranked up to nearly full power, very well. The wired remote volume and bass adjustment controls are very convenient and the sub is well made, with a good solid grille that should withstand the rigours of classroom use. The satellites have a screw slot for hanging on the wall and a cable guide which is accessible after removing the attached stands.

I expect these systems to handle all of our classroom needs and be a much more worthwhile setup with the electronic whiteboards and hung projectors in the classrooms that we are fitting out for these.

Monday, 28 January 2008

Trying... (grrrrr!) to have a USB Key to boot Windows PE

I have two Sandisk Micro Cruzer 512MB USB keys that I bought cheaply as they were end of line. These devices have a unique and excellent feature of a retractable plug built in, thus there is no cap to lose. The size is quite useful for many things. I got one of them formatted as a Windows 98 boot device using an HP utility that I got off the net. It is formatted as FAT16 and the whole capacity is available for use. I use this one mainly to boot to DOS to flash BIOS updates on PCs.

The second one is formatted as FAT32 and I set it up fairly recently as a boot device for Windows PE. The problem is, it keeps getting corrupted somehow. Then PCs can't boot off it, and they say there is a "disk error". Then I have to use a CD to boot Windows PE (but I can still run applications off the key, just not boot off it).

This has happened twice now and I am getting grumpy. I have swapped the keys over but still the Windows PE key gets some sort of corruption and stops being able to be booted from. What is going on here?

Using Sysprep on Windows PCs running Media Player 11

In a word, don't. When the master PC comes back up after sysprepping, it will crash in MSOOBE and refuse to complete setup. It then reboots, and repeats the whole schmozzle. There is no way out of this except to follow the steps set out below. This is caused by an incompatibility between MSOOBE and Windows Media Player 11.

The MSKB lists a number of steps that can undo the effects of running SysPrep. In my case, just the first step, copying a temporary System registry hive into the Config folder, let me restart Windows enough to get to the Control Panel's Add/Remove Programs option and uninstall WMP11. While you're at it, uninstall WMP11 Media Runtime as well. Then go back to Recovery Console, rename the temporary System file to something else, and rename the original hive file back to System. Restart your PC, and Windows should start up properly and run the msoobe wizard as it normally does after a sysprep.

The next step is to install WMP10. If it refuses to install, make sure WMP11 Media Runtime is uninstalled. Then try installing WMP10 again. Once you have got it installed, Sysprep again and this time, everything should be just fine.

UPDATE: I’ve now discovered how to stop this from happening. To work around this problem, use Mini Setup instead of MSOOBE when Sysprepping your reference PC. There is a box you can check when you run SysPrep that sets this option. Running Mini Setup should be done in conjunction with a Sysprep.inf file to minimise the number of options you have to enter in the wizard when it runs.